reliable one-piece solder contacts one-step installation termination for coax cables, shielded wires, twisted pairs, triaxial cables soldertacts shielded contacts for mil-c-38999, series i, ii, * iii, iv circular connectors *size 16 only. one-piece controlled-soldering soldertacts contacts for mil-c-38999 circular connectors are designed to termi- nate coaxial cables, shielded wires, and twisted pairs faster and more reliably than any other method. soldertacts contacts eliminate the variables associated with hard-to-handle crimping. their one-step installation accelerates production while reducing handling and installed costs. controlled soldering soldertacts contacts provide the optimum amount and type of solder and flux in prefluxed solder preforms to control soldering. the geometry of the coaxial cable is carried through the connector to eliminate separate pins, help reduce cross talk, and improve shielding effec- tiveness and signal transmission. soldertacts contacts provide simulta- neous electrical connection and strain relief. heat-shrinkable-tubing insulations eliminate stress concentration on the wire within the contact. because the insulation is transparent and inspection windows are provided, terminations are fully inspectable. compatibility the design versatility of soldertacts contacts makes them exceptionally well suited to military applications. soldertacts shielded contacts can be terminated with standard raychem heat- ing tools. once terminated, they can be installed into connector cavities with stan- dard insertion and extraction tools. they are replaceable without cutting and restripping or shortening the cable. soldertacts product construction soldertacts series: mil-c-38999 contact united states raychem military air force wire soldertacts specification a drawing no. jod sod dod cod (awg) part number size polarity cable type series i, iii, and iv m39029/60 .150?234 .150?170 .060?151 .019?043 22 24 d-602-0122 8 p coaxial m39029/59 .150?234 .150?170 .060?151 .019?043 22 24 d-602-0123 8 s coaxial m39029/76 915304-1 .050?103 .066?084 .036?068 .009?023 26 30 d-602-0140 16 p coaxial m39029/77 915305-1 .050?103 .066?084 .036?068 .009?023 26 30 d-602-0141 16 s coaxial m39029/76 915304-2 n/a n/a .025?043 .009?023 26 30 d-602-0142 16 p twisted pair m39029/77 915305-2 n/a n/a .025?043 .009?023 26 30 d-602-0143 16 s twisted pair m39029/28 915307-1 .058?122 .066?094 .044?080 .019?035 24 32 d-602-0144 12 p coaxial m39029/75 915308-1 .058?122 .066?094 .044?080 .019?035 24 32 d-602-0145 12 s coaxial m39029/28 915307-3 n/a n/a .029?057 .019?035 22 26 d-602-0146 12 p twisted pair m39029/75 915308-3 n/a n/a .029?057 .019?035 22 26 d-602-0147 12 s twisted pair m39029/28 915307-2 .075?150 .100?117 .050?103 .019?035 22, 28 d-602-0150 12 p coaxial m39029/75 915308-2 .075?150 .100?117 .050?103 .019?035 22, 28 d-602-0151 12 s coaxial m39029/77 915306-1 .050?103 .066?084 .036?068 .009?023 26 32 d-602-0171 16 s coaxial m39029/77 915306-2 n/a n/a .025?042 .009?023 26 32 d-602-0174 16 s twisted pair jacket (jod) shield (sod) dielectric (dod) conductor (cod) a these soldertacts contacts are intermateable and intermountable with contacts qualified to indicated specification; they replac e crimp-style termination. cable diameter (in inches) (continued) .com .com .com .com 4 .com u datasheet
soldertacts series: mil-c-38999 (continued) contact united states raychem military air force wire soldertacts specification a drawing no. jod sod dod cod (awg) part number size polarity cable type 8340712-os-01 .098 .135 .066 .120 .030 .049 .011 .031 24 26 d-602-1108 8 s twisted pair b 8340713-os-01 .098 .135 .066 .120 .030 .049 .011 .031 24 26 d-602-1109 8 p twisted pair b .098 .148 .066 .130 .036 .070 .009 .035 22 26 d-602-1110 8 s triaxial .098 .148 .066 .130 .036 .070 .009 .035 22 26 d-602-1111 8 p triaxial 8340712-ol-01 .098 .135 .066 .120 .030 .049 .011 .031 24 26 d-602-1112 8 s twisted pair b 8340713-ol-01 .098 .135 .066 .120 .030 .049 .011 .031 24 26 d-602-1113 8 p twisted pair b m39029/90 8912020-os-01 .145 max. .029 .051 .011 .029 24 26 dk-602-0156-1 8 p twinaxial m39029/90 8912020-dl-01 .162 max. .029 .051 .011 .029 24 26 dk-602-0156-2 8 p twinaxial m39029/90 8912020-el-01 .177 max. .029 .051 .011 .029 24 26 dk-602-0156-3 8 p twinaxial m39029/91 8912019-os-01 .145 max. .029 .051 .011 .029 24 26 dk-602-0157-1 8 s twinaxial m39029/91 8912019-dl-01 .162 max. .029 .051 .011 .029 24 26 dk-602-0157-2 8 s twinaxial m39029/91 8912019-el-01 .177 max. .029 .051 .011 .029 24 26 dk-602-0157-3 8 s twinaxial m39029/90 8912020-ol-01 .184 max. 20 dk-602-0169-1 8 p twinaxial m39029/91 8912019-ol-01 .184 max. 20 dk-602-0170-1 8 s twinaxial series ii m39029/77 915306-1 .050 .103 .066 .084 .036 .068 .009 .023 26 30 d-602-0171 16 s coaxial m39029/77 915306-2 .025 .042 .009 .023 26 30 d-602-0174 16 s twisted pair a these soldertacts contacts are intermateable and intermountable with contacts qualified to indicated specification; they replac e crimp-style termination. b these soldertacts contacts are designed for shielded twisted pair cable per mil-std-1553b. tool selection guide engineering convection standard (hot air) heating ir1004 infrared contact contact soldertacts part numbers (termination at-1319 repair semiautomatic insertion removal series (d-602-) instructions) adapter wand heater tool set tool tool* 999 0140/0141 es61226 at-1319-78 ad-1565 at-1044-70 (p) m81969/8-07 m81869/8-08 size 16 0142/0143 es61224 at-1044-69 (s) or or 0171 es61226 at-1319-27 ad-1572 m81969/14-03 m81969/14-03 0174 es61224 999 0144/0145 es61206 at-1319-24 ad-1566 at-1044-72 (p) m81969/8-09 m81969/8-10 size 12 0146/0147 es61218 at-1044-71 (s) or or 0150/0151 es61223 m81969/14-04 m81969/14-04 999 0122/0123 es61179 at-1319-22 ad-1568 m81969/14-06 size 8 1108/1109 es61172 at-1319-22 ad-1568 or 1110/1111 es61172 and and astro atbx-2277 1112/1113 es61184 at-1319-14 ad-1480 0156/0157-x es61231 0169/0170-x es61235 *raychem does not provide this tool. see connector manufacturer. performance the performance of soldertacts contacts is defined by the applicable raychem specification control drawing (scd) and raychem specification d-6002. products on qualified product lists meet the requirements of the base specification. termination termination of soldertacts contacts is defined in the appropriate raychem engineering standard. to obtain a copy, contact your raychem representative. cable diameter (in inches) ?1986, 1993, 1994, 2000 tyco electronics corporation printed in usa h54709 10/00 soldertacts is a trademark of tyco electronics corporation. all information, including illustrations, is believed to be reliable. users, however, should independently evaluate the suitabi lity of each product for their application. tyco electronics makes no warranties as to the accuracy or completeness of the information, and disclaims any liab ility regarding its use. tyco electronics only obligations are those in the standard terms and conditions of sale for this product and in no case will tyco electronics b e liable for any incidental, indirect or consequential damages arising from the sale, resale, use, or misuse of the product. tyco electronics specifications are subject to change without notice. in addition, tyco electronics reserves the right to make changes in materials or processing without notification to the buyer which do not a ffect compliance with any applicable specification. tyco electronics corporation tyco electronics uk ltd. tyco electronics raychem k.k. raychem singapore pte. ltd. raychem raychem raychem raychem 305 constitution drive cheney manor industrial estate 3816 noborito, tama-ku no. 26 ang mo kio ind. park menlo park, ca 94025 swindon, wiltshire sn2 2qe kawasaki 214-8533 singapore 569507 u.s.a. u.k. japan www.tycoelectronics.com .com .com .com .com 4 .com u datasheet
|
